STIHL FS 94 R Manuel d'instructions télécharger pdf (Page 15)

STIHL FS 94 R

English

13

STIHL AutoCut mowing head

Nylon cutting line advances

automatically when tapped against the

ground (TapAction).

STIHL PolyCut mowing head 20-3

Uses either nylon lines or nonrigid,

pivoting polymer blades.

Observe wear indicators.

WARNING

Three rectangular wear limit marks are

applied to the base (periphery) of the

PolyCut. To reduce the risk of serious

injury from breakage of the head or

blades, the PolyCut must not be used

when it has worn as far as one of these

marks. It is important to follow the

maintenance instructions supplied with

the head.

WARNING

If the wear limit marks are ignored, there

is a risk of the cutting attachment

shattering and flying parts injuring the

operator or bystanders. To reduce the

risk of accidents from shattered blades,

avoid contact with stones, metal and

similar solid objects. Check PolyCut

blades for cracks at regular intervals. If a

crack is found on one blade, always

replace all blades.

STIHL FixCut mowing head

Uses pre-cut lengths of nylon line.

Observe wear indicators.

Do not continue using the mowing head

if the raised moldings (1) on the base

are missing or worn – see right

illustration above. The mowing head

may otherwise shatter and flying objects

could result in injury to the operator or

bystanders. Install a new mowing head.

Risk of Kickout (Blade Thrust) with All

Rigid Cutting Blades

WARNING

Kickout (blade thrust) is the sudden and

uncontrolled motion towards the

operator's right or rear that can occur

when the shaded area (especially the

darkly shaded area) of a rotating blade

comes in contact with a solid rigid object

like a tree, rock, bush or wall. The rapid

counterclockwise rotation of the blade

may be stopped or slowed, and the

cutting attachment may be thrown to the

right or to the rear.

This kickout (blade thrust) may cause

loss of control of the power tool and may

result in serious or fatal injury to the

operator or bystanders. To reduce the

risk of injury, extreme caution should be

used when cutting with the shaded area

of any rigid blade.

Using the Grass Cutting Blade

All kinds of grass and weeds can be

easily cut with the grass cutting blade.

The power tool is swept in an arc similar

to a scythe.

WARNING

To reduce the risk of serious or fatal

injury from blade breakage, never

attempt to use this blade to cut woody

materials.

The 4-tooth grass cutting blade is

intended to cut grass and weeds. It has

4 cutting knives with cutting edges on

both sides, i.e. front and rear. When the

cutting edges on one side become dull,

the blade can be turned over to utilize

the cutting edges on the other side.

The 8-tooth grass cutting blade is

recommended for cutting fern or reed.

002BA177 KN

002BA135 KN

002BA355 KN

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 99 100

Commentaires sur ces manuels

Pas de commentaire