STIHL BT 130 Earth Auger Manuel d'instructions télécharger pdf (Page 22)

BT 130

English

WARNING

To reduce the risk of fire and burn injury,

use only spark plugs authorized by

STIHL. Always press spark plug boot (1)

snugly onto spark plug terminal (2) of the

proper size. (Note: If terminal has

detachable SAE adapter nut, it must be

securely attached.) A loose connection

between spark plug boot and ignition

wire connector in the boot may create

arcing that could ignite combustible

fumes and cause a fire.

Installing the spark plug

N Screw home the spark plug, fit the

boot and press it down firmly.

If engine running behavior is still

unsatisfactory after the air filter has been

serviced and the carburetor and throttle

cable have been adjusted correctly, the

cause may also be in the muffler.

Have the muffler checked for

contamination (coking) by a servicing

dealer!

STIHL recommends that maintenance

and repair work be carried out only by

authorized STIHL dealers.

N Check grease level regularly –

about every 50 hours of operation.

N Unscrew the filler plug (1).

If no grease can be seen on the inside of

the filler plug:

N Apply the tube (2) of STIHL gear

lubricant to the filler hole.

N Squeeze 5 – 10g (1/4 oz) grease

into the gearbox.

N Do not completely fill the gearbox

with grease.

N Refit the filler plug and tighten it

down firmly.

002BA363 KN

Engine Running Behavior Lubricating the Gearbox

9912BA019 KN

9912BA020 KN

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

STIHL BT 130 Earth Auger Manuel d'instructions Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Non STIHL BT 130 Earth Auger