STIHL MS 181 C-BE Manuel d'instructions Page 30

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 140
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 29
MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
28
Releasing the chain brake
N Pull hand guard towards the front
handle until it engages audibly –
chain brake is released
Fitting the saw chain
WARNING
Put on protective gloves – risk of injury
by the sharp cutters.
N Fit the saw chain – starting at the
nose of the guide bar pay attention
to the position of the tensioning gear
and the cutting edges
N Turn tensioning gear (1) to the right
as far as possible
N Turn the guide bar so that the
tensioning gear faces the user
N Place the saw chain on the chain
sprocket (2)
N Slide the guide bar over the collar
screw (3); the head of the rear collar
screw must protrude into the oblong
hole
N Guide the drive link into the bar
groove (see arrow) and turn the
tensioning gear to the left as far as
possible
N Fit chain sprocket cover, sliding the
guide lugs into the engine housing
openings
When fitting the chain sprocket cover,
the teeth of the adjusting wheel and the
tensioning gear must mesh; if
necessary,
001BA186 KN
1
181BA012 KN
2
3
181BA013 KN
135BA011 KN
4
5
2310BA018 KN
Vue de la page 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 139 140

Commentaires sur ces manuels

Pas de commentaire